Saturday, December 31, 2011

Happy New year 2012

Wish you all a HAPPY NEW YEAR 2012.
May this year brings you happiness and prosperity in your life.
Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Wish you a happy new year 2012

Friday, December 9, 2011

List of lab experiments of Digital electronics of first Sem Diploma- EC


Department of Technical EducationDiploma Programme in Electronics and Communication Engineering/ Electronic Instrumentation & Control Engineering  1st SEMISTER

SUBJECT : DIGITAL ELECTRONICS LAB

Common to E&C, EI&C, CS&E and IS&E
Lab Experiments :
A1 Familiarization of Digital trainer kit, IC tester, Logic pulser, logic probe
2Study of IC Manual and familiarization of Ics and IC familiesB1Familiarization of logic gates using Ics

a) 7400      b) 7402      c) 7404   d) 7408    e) 7432  f)  7486
2  Realization of NOT, OR, AND, NOR, EX-OR and EX-NOR gates using NAND gate
3  Realization of NOT, OR, AND, NOR, EX-OR and EX-NOR gates using NOR gate
4  Implementing and verifying Boolean Expression using K-map
5  Verification of DeMorgan's theorem and realization of the given expression using Demorgan's law
6  Implementing Half Adder and Full Adder using logic gates
7  Implementing Half Subtractor and Full Subtractor using logic gates
8  Verification of truth table of Flip-Flop 

i )  Clocked RS FF using NAND Gates

ii)  JK FF Using IC 7476

iii)  T and  D FF using  IC 7476.
9     Realize Binary to Gray code converter using IC 7486
10   Realize Gray to Binary code converter using IC 7486
11   Realize parity generator and checker using IC 7486
12   Familiarization of IC 7483 with 4bit  addition
13   Realize 2-bit comparator using logic gates and familiarization of IC 7485
14   Interface  7 segment display with IC 7447 / 7448 decoder .
15   Verify the truth table of 1:8 Demultiplexer  and 8:1 multiplexer using IC 74138 and 74151respectively
16   Verify the truth table of priority encoder using IC 74147
17   Realize and verify the truth table of 4:1 Multiplexer using 2:1 Multiplexer
18   Verify the truth table of Shift Reigister 7495 ( SISO, SIPO, PISO, PIPO)
19   Veirfy the truth table of a) up-down counter using IC- 74193 b) Decade counter using IC-7490REFERENCES :

DIGITAL ELECTRONICS PRACTICE WITH INTEGRATED CIRCUITS  

R.P.JAIN AND MMS ANAND



SCHEME OF VALUATION
Note: Pin diagrams of IC's shall be  provided to the students . 
1   Record
2   Write up any Two Experiments (Circuit Diagram,Truth Table Expression)
3   Conduction any one Experiment
4   Result
5   Viva-Voce

Model question paper of DIGITAL ELECTRONICS of Diploma 1st Sem - E C

            MODEL QUESTION PAPER          
        FIRST SEMESTER          
           SUBJECT :  DIGITAL ELECTRONICS-1          
        Common to E&C ,EI&C,CS&E and IS&E.           
        SUBJECT: DIGITAL ELECTRONICS-I  
        
        TIME :3 HRS
                                                                         MAX.MARKS :100          
                  
        Note:  1)Section A is  compulsory.          
                  2) Answer any two main questions from each of the remaining Sections
          
                  

        SECTION:  A          
                  
1    a.    Fill in the blanks with suitable words                                    5X1      
    (i)    The radix of hexadecimal number system is _______________          
    (ii)    The number of flip-flops required for decade counter is ______________          
    (iii)    Race around condition is eleminated in ________________ flip flop          
    (iv)    An example for unsaturated logic _________ Ics          
    (v)    The SISO shift register with feed back _________ counter          
                  
    b.    Write a note interfacing between TTL and CMOS Ics                         5      
                  
        SECTION:  B          
                  
2    a.    Define the radix of a number system    2      
    b.    Convert the following from Binary to Decimal number system    8      
         (i) 11001001 (ii) 1110.1111          
        (iii) 11001111 -->( )h   (iv) 1AF--> ( ) D          
    c.    Subtract the following using 2's complemnet method          
        (i) 1FE2- 0AC2            (ii) 412.6 - 255.0    5      
                  
3    a.    Convert the following gray code to binary code (i) 110101 (ii) 111110     2      
    b.    Convert the following Excess-3 code to binary code (i) 11011 (ii) 10110   3      
    c.    Differentiate analog and digital signals                                                          5      
    d.     Expalin AND logic with symbol,  logic expression and truth table, .             5      
                  
4    a.    Define Noise Margin and power dissipation with reference to logic families  4      
    b.    State Associative and Distributive laws of Boolean Algebra                       4      
    c.    Simplfy the following expressions and realize the same using gates          
        (i) A+(BC.(D+E)+ B))     (ii) (A+B).(C+D).(AB+CD)                     7      
                  
                  
        SECTION: C          
                  
5    a.    What is a Full adder? Use K- map to derive logic expressions for its output    7      
    b .   Compare serial and parallel adders                                 3      
    c .   Explain the operation of 4-bit parallel adder                      5      
                  
6    a .   What is a priority encoder?                                 2      
    b.    Write the logic circuit and truth table of Decimal to BCD encoder   8      
    c.    Write the logic circuit and truth table of BCD to seven segment decoder for common
         anode display                                                            5                     
7    a.    What is a multiplexer?                                          2      
    b    Explain the 8:1 multiplexer with the help truth table and logic circuit      6      
    c .   What is the use of De-multiplexer? Write the truth table and logic circuit of
           4:1 De-multiplexer                                                     7      
                  
        SECTION: D          
                  
8    a.     Differentiate between combinational and seqential circuits         3      
    b .   Explain the operation of clocked RS-FF using NAND gates         6      
    c.    What is meant by Race around condition? How it is overcome?    7      
                  
9    a .   Explain the logic diagram, truth table and timing diagram,
       the operation of 4-bit ripple counter                              8      
    b.    What do you by modulus of counter?                         2      
    c .   Explain how decoding gates can be used for construction of mod-11 counter   5      
                  
10    a .   Explain with logic diagram, truth table and timing diagram,
              the operation of a 4-bit shift counter  8    
    b.    Write the logic diagram of a 4-bit shift register.
           Write the truth table and timing diagram for a 4-bit SISO register for a data of 1011  ( 7 )

Wednesday, December 7, 2011

Court orders to file Case Against on Vidyabalan

Nampally Court orders to file case on Vidyabalan.
Case on Vidyabalan
Nampally court
File case on Vidyabalan
Case filed on vidyabalan
Court order to file case on vidyabalan
filing case against vidyabalan 
Tv 9 - The Dirty Picture New Controversy
Vidyabalan on Dirtypicture
Hot news today
Court ordering to file case against on vidyabalan
The dirty picture controversy
Watch on tv9

Monday, December 5, 2011

Top 100 serial numbers / keys, crack or keygen for free.


13. Nero 9
35. Nero 7
45. Nero 6

Friday, December 2, 2011

Know more about Why This Kolaveri kolaveri Di Song

                     
                   Why This Kolaveri Di  is a song from the soundtrack of the upcoming Tamil film 3, which is due to be released in 2012. The soundtrack and background score is composed by Anirudh Ravichander. This song was officially released on 16th November 2011, and it instantly became viral on social networking sites for its quirky "Tanglish" (Tamil–English) lyrics. Soon, the song became the most searched YouTube video in India and all over the world. 
                
                      According to composer Anirudh Ravichander, the director Aishwarya Dhanush wanted a lofty fresh song on love failure, and he had composed a suitable tune for that. Dhanush, then reportedly came up with this song in around 20 minutes. In an interview to The Times of India, Dhanush said "When I was writing down the lyrics, I kept in mind all the English words that are used in the Tamil vocabulary. Words like I, you, me, how, why, cow.. I just framed them into sentences and thats how I came up with the song." According to Dhanush, the song is suitable only for bathroom singers. Its simplistic and rustic beats make it more catchy to the commoner. Heartbreak is a phenomenon almost everyone can relate to. The song was initially leaked to the internet, and the makers, having noticed its popularity, decided to go for an official release.
  
Lyrics :
 
The lyrics of this song is rather simple and is written in the easiest form of Tanglish, a mixture of Tamil and English. The lyrics portray the feelings of an average Indian boy, who has failed in love, or who has some problems with his girl.

Music video :

This song was initially leaked on the Internet, and the makers, having noticed its popularity, decided to go for an official release. The music video features the actor-playback singer Dhanush singing the song in a studio, while co-star Shruti Haasan and director Aishwarya Rajinikanth hear along in the sidelines. Composer Anirudh is at the piano.

Lyrics of the Song " Why this Kolaveri Kolaveri Di "

In recording Studio
 
yo boys i am singing song
soup song
flop song
why this kolaveri kolaveri kolaveri di
why this kolaveri kolaveri kolaveri di
rhythm correct
why this kolaveri kolaveri kolaveri di
maintain please
why this kolaveri..di

distance la moon-u moon-u 
moon-u  color-u  white-u
white background night-u nigth-u
night-u color-u black-u

why this kolaveri kolaveri kolaveri di
why this kolaveri kolaveri kolaveri di

white skin-u girl-u girl-u
girl-u heart-u black-u
eyes-u eyes-u meet-u meet-u
my future dark

why this kolaveri kolaveri kolaveri di
why this kolaveri kolaveri kolaveri di

maama notes eduthuko
apdiye kaila snacks eduthuko
pa pa paan pa pa paan pa pa paa pa pa paan
sariya vaasi
super maama ready
ready 1 2 3 4

whaa wat a change over maama

ok maama now tune change-u

kaila glass
only english.. 

hand la glass
glass la scotch
eyes-u full-aa tear-u
empty life-u
girl-u come-u
life reverse gear-u
lovvu lovvu 
oh my lovvu
you showed me bouv-u
cow-u cow-u holi cow-u
i want u hear now-u
god i m dying now-u
she is happy how-u

this song for soup boys-u
we dont have choice-u

why this kolaveri kolaveri kolaveri di
why this kolaveri kolaveri kolaveri di
why this kolaveri kolaveri kolaveri di
why this kolaveri kolaveri kolaveri di

flop song

HTML Tutorial - 13

How to create a mixed frameset of rows and columns in Html Script ?

Solution :
Step 1: Go to Notepad.
Step 2: Copy the HTML script below to the notepad.
 
  

<html>

<frameset rows="50%,50%">

  <frame src="frame_a.htm" />
  <frameset cols="25%,75%">
    <frame src="frame_b.htm" />
    <frame src="frame_c.htm" />
  </frameset>

</frameset>

</html>

Step 3: Now save the file with .html format.
Step 4: Close the notepad and now open the saved file in your default browser .

That's it ! 
You will see like the below picture in your browser
Mixed Frame sets in rows and columns

Bangalore Railway Station train time table.

Trains from Bangalore / Bengaluru 

Note: Train Schedule is subject to change over time.Even though we try our level best to provide you accurate Train timings information here, we can't guarantee it's 100% correct.

 

Train NumberTrain NameTrain Source StnSource Dep. TimeTrain Destination StnDest. Arr. Time
06227Shimoga ExpressBangalore City Junction/SBC11:40PMShimoga Town/SMET06:15AM
0636Kochuveli Chennai ExpressBangalore City Junction/SBC11:00PMChennai Central/MAS05:15AM
0642Eranakulam ExpressBangalore City Junction/SBC05:15PMEranakulam Junction/ERS04:20AM
0644Bangalore Eranakulam ExpressBangalore City Junction/SBC06:50PMEranakulam Junction/ERS06:30AM
0683Nagercoil ExpressBangalore City Junction/SBC10:45PMNagercoil Junction/NCJ02:15PM
0704Bangalore Kacheguda SpecialBangalore City Junction/SBC01:00PMKacheguda/KCG04:00AM
2028Chennai Bangalore Shatabdi ExpressBangalore City Junction/SBC06:00AMChennai Central/MAS11:00AM
2079Hubli Jan Shatabdi ExpressBangalore City Junction/SBC06:00AMHubli Junction/UBL01:10PM
2295Sangamitra ExpressBangalore City Junction/SBC09:00AMPatna Junction/PNBE09:20AM
2295ABangalore Patna ExpressBangalore City Junction/SBC09:30AMPatna Junction/PNBE09:50AM
2429Bangalore Rajdhani ExpressBangalore City Junction/SBC08:20PMH Nizamuddin/NZM05:50AM
2509Guwahati ExpressBangalore City Junction/SBC11:30PMGuwahati/GHY05:50AM
2578Darbhanga ExpressBangalore City Junction/SBC09:00AMDarbhanga Junction/DBG01:30PM
2592Gorakhpur ExpressBangalore City Junction/SBC04:40PMGorakhpur Junction/GKP03:20PM
2608Lalbagh ExpressBangalore City Junction/SBC06:30AMChennai Central/MAS12:15PM
2610Chennai ExpressBangalore City Junction/SBC08:15AMChennai Central/MAS02:45PM
2614Tippu ExpressBangalore City Junction/SBC02:15PMMysore Junction/MYS04:45PM
2627Karnataka ExpressBangalore City Junction/SBC07:20PMNew Delhi/NDLS10:35AM
2640Brindavan ExpressBangalore City Junction/SBC02:30PMChennai Central/MAS08:20PM
2658Chennai MailBangalore City Junction/SBC10:45PMChennai Central/MAS04:40AM
2677InterCity ExpressBangalore City Junction/SBC06:15AMEranakulam Junction/ERS04:50PM
2684Eranakulam ExpressBangalore City Junction/SBC05:15PMEranakulam Junction/ERS04:20AM
2692Chennai ExpressSri Satya Sai Prasanthi Nilayam/SSPN07:10PMChennai Central/MAS05:15AM
2725Siddhaganga ExpressBangalore City Junction/SBC01:50PMHubli Junction/UBL09:45PM
2786Kacheguda ExpressBangalore City Junction/SBC06:20PMKacheguda/KCG05:40AM
6206Tippu ExpressBangalore City Junction/SBC02:15PMMysore Junction/MYS04:45PM
6216Chamundi ExpressBangalore City Junction/SBC06:15PMMysore Junction/MYS09:10PM
6227Shimoga ExpressBangalore City Junction/SBC11:40PMShimoga Town/SMET06:15AM
6227BShimoga ExpressBangalore City Junction/SBC11:40PMShimoga Town/SMET06:15AM
6315Kochuveli ExpressBangalore City Junction/SBC05:15PMKochuveli/KCVL09:30AM
6321Trivandrum ExpressBangalore City Junction/SBC06:50PMTrivandrum Central/TVC12:00PM
6502Ahmedabad ExpressBangalore City Junction/SBC01:30PMAhmedabad Junction/ADI04:00AM
6504Satya Sai Prashanti Nilayam ExpressBangalore City Junction/SBC06:45AMSri Satya Sai Prasanthi Nilayam/SSPN10:45AM
6506Gandhidham ExpressBangalore City Junction/SBC09:50PMGandhidham Junction/GIM02:00PM
6508Jodhpur ExpressBangalore City Junction/SBC09:50PMJodhpur Junction/JU05:00PM
6524Chennai ExpressBangalore City Junction/SBC08:15AMChennai Central/MAS02:45PM
6526Island ExpressBangalore City Junction/SBC09:45PMKanyakumari/CAPE06:05PM
6530Udyan ExpressBangalore City Junction/SBC08:10PMMumbai CST/CSTM07:50PM
6589Rani Chennamma ExpressBangalore City Junction/SBC09:15PMC Shahu Maharaj Terminus/KOP01:40PM
6592Hampi ExpressBangalore City Junction/SBC10:30PMHubli Junction/UBL11:00AM
7209Sheshadri ExpressBangalore City Junction/SBC01:15PMKakinada Town/CCT08:45AM
8464Prasanti ExpressBangalore City Junction/SBC02:00PMBhubaneswar/BBS08:55PM
8564Prasanthi ExpressBangalore City Junction/SBC02:00PMBhubaneswar/BBS08:55PM

Why This Kolaveri Di Full Video Song in HD.


Model question paper of ELECTRONIC MEASUREMENTS AND INSTRUMENTATION of Diploma 3rd Sem - E & CE

DERARTMENT OF TECHNICAL EDUCATION
DIPLOMA COURSE IN ELECTRONICS & COMMUNICATION ENGG.
THIRD SEMESTER
    ELECTRONIC MEASUREMENTS AND INSTRUMENTATION                                                 
MODEL QUESTION PAPER

MAX MARKS:100                                                               TIME :3Hrs
       
INSTRUCTIONS:-
1) SECTION-I IS COMPULSORY   
2 ) ANSWER ANY TWO FULL QUESTIONS FROM EACH OF THE REMAINING    
    SECTIONS.

SECTION –I
1(a) Fill in the Blanks                                                                           5 X 1 = 5
1.                  Wein bridge is normally used for the measurement of ________
2.                  An example of inverse transducer is__________.
3.                  _________coating is used to collect secondary electrons in CRT.
4.                  The standards maintained at National standard labs are called ________
5.                  Errors due to human mistakes are called ____________.

  (b) Write a note on IEEE488 GPIB interfacing.          5

SECTION-II
2 (a)  Explain with  a block diagram, the operation of a generalized electronic
           measurement system.                  9
     (b)  Define (i) accuracy (ii) Precision (iii) Error w.r.t measurements     6

3(a) A 0-100Volt Voltmeter has an accuracy of 1% of full scale reading.
    If the voltage measured by this instrument is 83 volts, find the limiting error in percentage   5
   (b) Explain the use of wein's bridge in frequency measurement.
     Derive the equation for unknown frequency.       10

4(a) Explain the operation of the basic PMMC movement .     7
   (b) Explain the basic principle of  Electrodynamometer .        6
    (c) Define voltmeter sensitivity.                      2

SECTION-III
5(a) With the help of a block diagram, explain the operation of Digital Storage
        Oscilloscope.           9
(b) What are lissajous patterns?. Explain how they can be used for phase difference
       measurement.        6

6(a) Explain the working of Heterodyne wave analyzer.     6
   (b)  list the uses of Spectrum analyzer.                 3
   (c) What are active , passive and inverse transducers? Give example for each.   6

7(a)     Explain the principle of LVDT displacement transducer.   6
  (b)  List the advantages and disadvantages of thermistors.   4
   (c)  write a note on digital optical Encoders.             5
                                                                                                                                   
SECTION-IV
8(a) Explain the working of Chopper DC amplifier type voltmeter.       7
   (b) Explain the operation of Q meter.              8

9(a) Explain the working of Successive approximation type DVM.     10
   (b) List the advantages of digital instruments.      5

10(a) Explain the principle of digital time interval measurement.    5
     (b) List the precautions to prevent instrument damage.    5
     (c)Write a note on shielding.          5

Model question paper of Digital Electronics of Diploma 3rd Sem - E & CE

DERARTMENT OF TECHNICAL EDUCATION
DIPLOMA COURSE IN ELECTRONICS & COMMUNICATION ENGG.
THIRD SEMESTER
                                                                                                                                              
MODEL QUESTION PAPER
Digital Electronics and Introduction to Microprocessor
MAX MARKS:100                                                               TIME :3Hrs
       
INSTRUCTIONS:-
1    SECTION-I IS COMPULSORY   
2    ANSWER ANY TWO FULL QUESTIONS FROM EACH OF THE REMAINING    
    SECTIONS.
SECTION:  I       
               
1    a    Fill in the blanks with suitable words                                      1X5   
    (i)    The number of comparators required to build an 8-bit flash
        ADC is--------------       
    (ii)    Register which keeps track of instruction execution is---------   
    (iii)    MC68000 is a  ---------- bit processor       
    (iv)    RISC stands for ----------       
    (v)    A basic memory cell in a DRAM is  ----------       
               
    b    Write a note on Generic Array Logic                        5   
               
    SECTION:  II       
               
2    a    Explain the circuit operation of TTL Nand gate for low and
        high state                                                                            10   
    b    What three characteristics of real wires add up to distort
        signals that move through them                                        3       
    c    What is the IEEE/ANSI symbol for tristate outputs     2   
               
3    a    Explain the working of Binary ladder network for converting
        the digital to analog data                                                                8
    b    Define the terms Resolution & Accuracy as applied to DAC    4   
    c    Determine the resolution of a 12-bit A/D converter having a
         full scale analog input voltage of 5v.                                             3 
                   
4    a    Explain the working of Successive approximation type ADC
        with block diagram     8
        the digital to analog data   
    b    Define quantization error in ADC’s    3   
    c    Explain the working of low frequency function generator using
        DAC              4   
                                                                          SECTION: III       
               
5    a    Define the terms i) memry cell ii) memory word iii) Access
        time     6           
    b    With A CPU memory connection block diagram explain the
         steps that take place when the CPU writes to memory    6   
    c    Explain the construction of basic SRAM memory cell    3   
               
6    a    Two 16MB RAMs are used to build a RAM capacity of 32MB.
         Show the configuration and also state the address inputs for
        which the two RAMs will be active. The two RAMs have
        common i/o pins, a write enable i/p that is active low and a
        active high chip select i/p.                 8   
    b    Write a note on Cache memories    4
    c    mention the differences between fixed logic and
        programmable logic                           3   
               
7    a    With neat block diagram explain the internal architecture of
        CPLD    8
    b    Implement the Boolean function Y= BC+ A C+ABC using
        PAL    5
    c    Mention the number of i/o lines in PAL device designated as
        PAL-16L8    2   
               
                                                                 SECTION: IV       
               
8    a     Explain the inside of a Microprocessor with a neat schematic    7   
    b    Explain the following addressing modes i) Immediate 
        ii) Indexed    04   
    c    List the differences between RISC and CISC processors    4   
               
9   a    List the differences between Microprocessor and
        Microcontroller                                                                   4
    b    Explain the inside of a Microcontroller with a neat schematic    7   
    c    List the advantages and disadvantages of LCD    4   
               
               
10    a    Explain the operation of seven segment  display.    6 
        b    Explain the operation dynamic scattering type of LCD.   6
        c    Write a note on multiplexed displays.    3 

Model question paper of Analog Electronics of Diploma 3rd Sem - E & CE


DERARTMENT OF TECHNICAL EDUCATION
DIPLOMA COURSE IN ELECTRONICS & COMMUNICATION ENGG.
THIRD SEMESTER
                                                                                                                                              
MODEL QUESTION PAPER
ANALOG ELECTRONIC CIRCUITS

MAX MARKS:100                                                                                      TIME :3Hrs
INSTRUCTIONS:-
1      SECTION-I IS COMPULSORY                                                                                                                         
2     ANSWER ANY TWO FULL QUESTIONS FROM EACH OF THE REMAINING SECTIONS.
         
SECTION   I

1 A)    FILL IN THE BLANKS WITH APPROPIRATE WORDS:-                          1X5
I)         The Ripple Factor of Bridge rectifier is  ______________.
ii)        The Cross over Distortion is overcome in _____________amplifier.                                 
iii)       The input impedence of an Ideal OPAMAP is ______________.
iv)       PLL stands for  ______________.                                                                                  
v)        Oscillator  uses _______________Feedback.                                                                  
                                                                                                                                              
B)       Write a  note on IC Switching Regulators.                                                    5
                                                                                                                                              
SECTION :II
2 a)   Define the following terms                                                                                             
 I)  Ripple Factor. II)Regulation.                                                                                                                4                                 
b)    Explain  block diagram regulated Power Supply.                                      6
c)    Explain  operation of Bridge Rectifier   with a neat circuit diagram.             5
                                                                                                                                              
3 a)   Explain the circuit of Series Voltage Regulator.                                        6
b)     Explain the need for filters in rectifiers.                                                       5
c)     Mention the advantages of SMPS.                                                            4
         
4a)   Explain functional block diagram of  IC 555 Tmer.                                       10
b)   Explain  the operation of Collpits  Oscillator.                                                  5

SECTION : III
5a)  Define Biasing . Explain Voltage divider Bias with a neat Circuit diagram         6
b)  Give the detailed classification of Amplifiers.                                                  4
c)   Explain the frequency response of RC coupled amplifiers.                               5
                                                                                                                                              
6a)  Explain the working of complementary push pull power amplifier with a neat circuit.    7
b)   A cascaded voltage amplifier having Gains Av1=10, Av2=15, Av3=20  Determine 
overall Voltage gain and Gain in Decibels.                                                         4
c)    Explain double ended Clipper with a neat circuit diagram.                              4
                                                                                                                                              
7a)   Explain the operation of RC Differentiator and Integrator Circuit with waveforms. 10
b)   List the application of Clippers and Clampers.                                       5
SECTION :IV
8a)  Draw and explain block diagram of LM741 opamp.                                5
b)  List the ideal characteristics of opamp.                                                  5
c)  Explain the operation of Schmitt Trigger circuit using OPAMP.                5
                                                                                                                                              
9a) Define the following parameters w.r.t OPAMP
   i)   PSRR         ii)  CMRR       iii) Gain-Bandwidth product
iv) Slew rate     v) Input and Output Impedance.                              10
b) Describe the Instrumentation Amplifier circuit.                                   5
                                                                                                                                              
10a)  Explain the I st order Butterworth Active Low Pass using OPAMP.         5
b)  Explain the circuit of Voltage to frequency Converter .                            5
c)  Explain the operation of PLL .                                                             5
Disclaimer: "I do not own the rights of the content provided in this blog. All content provided on this blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information".